Step 6 - Position Water Line And House Wiring; Step 7 - Insert Drain Hose Through Cabinet; Step 8 - Slide Dishwasher Partially Into Cabinet - GE Built-In Dishwasher Installation Instructions Manual

Built-in dishwasher
Hide thumbs Also See for Built-In Dishwasher:
Table of Contents

Advertisement

Available languages

Available languages

STEP 6 – POSITION WATER LINE AND
HOUSE WIRING
floor of the opening to avoid interference with base
of dishwasher and components under dishwasher.
Water
Line
Figure 12
STEP 7 – INSERT DRAIN HOSE THROUGH
CABINET
opening. Insert drain hose into cabinet wall hole.
If a power cord is used, guide the end through a
separate hole.
Insulation
Blanket
Figure 13
TIP: Position water line and house wiring on the floor
to avoid interference with base of dishwasher.
Installation Instructions
4"
6"
House
Wiring
Maximum
Drain Hose
Length 10'
Water
Line
Drain
Hose
House
Wiring
Power Cord
(If Used)
STEP 8 – SLIDE DISHWASHER PARTIALLY
INTO CABINET
DO NOT PUSH AGAINST FRONT PANEL WITH KNEES.
DAMAGE WILL OCCUR.
Side dishwasher into the opening a few inches at a time.
Do Not Push Against
Front Door Panel With
Knee. Damage to The
Door Panel Will Occur.
opening under the sink. Stop pushing when the dishwasher
is a few inches forward of adjacent cabinetry.
and there is no interference with the water
line and wiring or any other component.
7
Figure 14

Advertisement

Table of Contents
loading

Table of Contents