Manual Setting Adjustment - Sanyo VCC-5974 Instruction Manual

4-2. MANUAL setting adjustment

1
Set the WB switches to the MANUAL mode (both switches 7
and 8 to OFF).
The on-screen setting for WHITE BALANCE will automatically
switch to MANUAL. Press the CURSOR (j or l) button to
select the on-screen MANUAL setting (get it flashing), then
press the SET button. The adjustment sub-menu
"ADJUSTMENT FOR WB" will be displayed.
CURSOR
WB
7 8
2
Press the CURSOR (d or c) button to adjust the R (red)
gain. The on-screen marker (b) will move and the adjustment
value will flash according to the red gain setting.
When finished setting the red gain, press the CURSOR (l)
button to select B (blue).
Press the CURSOR (d or c) button to adjust the B (blue)
gain. The on-screen marker (b) will move and the adjustment
value will flash according to the blue gain setting.
Note:
When an adjustment is made, the PRESET setting will
automatically switch to OFF. To return to the initial values, just
return the PRESET setting to ON, then press the SET button.
3
When finished.
(Refer to step 3 on page 15.)
MENU FOR ADJUSTMENT
SET
SYNC
IRIS
BLC
WHITE BALANCE
AGC
ADJUSTMENT FOR WB
INT
AI
R
ON
MANUAL
ON
B
PRESET
END
22
(GAIN)
o------z------p 86
o------z------p 72
OFF
MENU
English