Iris; Auto-Iris Level Adjustment - Sanyo VCC-5974 Instruction Manual

ADJUSTMENTS

2. IRIS

2-1. Auto-iris level adjustment

1
Set the IRIS switch (10) to AI.
The on-screen setting will automatically switch to AI. Press the
CURSOR (j or l) button to select the on-screen AI setting
(get it flashing), then press the SET button. The adjustment
sub-menu "ADJUSTMENT FOR AI" will be displayed.
CURSOR
AI
EI
2
Press the CURSOR (d or c) button until the desired iris level
is obtained. The on-screen marker (b) will move and the
adjustment value will flash according to the iris level setting.
Note:
When an adjustment is made, the PRESET setting will
automatically switch to OFF. To return to the initial value, just
return the PRESET setting to ON, then press the SET button.
3
When finished.
(Refer to step 3 on page 15.)
Notes:
•
If IRIS is set to EI (electronic iris mode), the SHUTTER setting
function will not operate.
•
When the AGC switch is set to OFF the IRIS cannot be set to
EI.
English
MENU FOR ADJUSTMENT
SET
SYNC
IRIS
BLC
17
ADJUSTMENT FOR AI
INT
AI
ON
ADJUSTMENT FOR AI
PRESET
END
Example:
When the image is dark,
press the CURSOR (d or
c) button to move the
on-screen marker close to
the position indicated above.
(IRIS LEVEL)
o------z------p 23
(IRIS LEVEL)
o------z------p 35
OFF
MENU