Microcom 424M Operator's Manual page 27

Getting Started
This is a Micoptions configuration window sample.
Select the COMM port
# that the FTDI device
is connected to.
3-10
If selected, the driver
will auto detect the
communication port.
This should be disabled
if using the command
line.
The Form Setup may be used to save
a configuration.
Export the form to save the setup and
select Import to use an existing setup.
Selecting this will
report the port
that the USB
device is
detected on.
324M/424M Operator's Manual - 880026-0144
Chapter 3