Comfort Glow S39PT Owner's Operation And Installation Manual page 12

INSTALLATION
Continued
INSTALLING LOGS
WARNING: Failure to posi-
tion the parts in accordance
with these diagrams or failure
to use only parts specifically
approved with this heater may
result in property damage or
personal injury.
CAUTION: After installa-
tion and periodically thereafter,
check to ensure that no flame
comes in contact with any log.
With the heater set to HI, check
to see if flames contact any log. If
so, reposition logs according to
the log installation instructions
in this manual. Flames contact-
ing logs will create soot.
It is very important to install the logs exactly as
instructed. Do not modify logs. Only use logs
supplied with heater.
Place one-piece log set on grate to fit as illustrated
in Figure 11. Make sure log sits flat on firebox floor
(see Figure 11).
IMPORTANT: Make sure log does not cover any
burner ports (see Figure 12).
One
Piece
Log Set
Figure 11 - Installing One-Piece Log Set
12
Figure 12 - Installing One-Piece Log set
Firebox Floor
www.desatech.com
Burner Ports
(Top View)
One Piece
Log Set
111417-01B