Message Playback - VTech CareLine SN6187 User Manual

Answering system operation

Message playback

When playback begins, the total number of old or new messages is
announced. Before each message, you hear the day and time of the
recording. If the date and time are not set, you hear, "Time and date
not set," before playback. After the last message, you hear, "End of
messages." If the recording time is less than three minutes, you hear,
"Less than three minutes to record." If there is no remaining recording
time, you hear "Memory is full." If there are no recorded messages, the
handset shows No messages and you hear, "You have no messages."
To play messages at the telephone base:
/PLAY when the telephone base is not in use.
Press
Options during playback:
• Press qVOL or pVOL to adjust the message playback volume.
/SKIP to skip to the next message.
• Press
/REPEAT to repeat the message. Press
• Press
hear the previous message.
Press X/DELETE to delete the playing message. The system
•
announces, "Message deleted," and then advances to the
next message.
/STOP to stop the playback.
• Press
• Press to reduce the playback speed.
78
/REPEAT twice to