Getting started
Handset charger installation
1.
Install the charger
as below.
IMPORTANT:
Check for a dial tone by pressing
tone, the installation is successful.
If you do not hear a dial tone:
•
Make sure the installation procedures described
above are properly done.
•
It may be a wiring problem. If you have changed
your telephone service to digital service from a cable
company or a VoIP service provider, the telephone
line may need to be rewired to allow all existing
telephone jacks to work. Contact your cable/VoIP
service provider for more information.
Electrical outlet
not controlled
by a wall switch
Handset charger
power adapter
2.
Place the handset in
the telephone base
or handset charger
to charge.
. If you hear a dial
3