Installation and configuration
Prepare the handset
Handset charger installation
•
Use only the AC
Plug the handset charger power adapter into the power port located at the bottom of the charger
power adapter
and the other end into the electrical outlet as shown below. Make sure the electrical outlet is not
supplied with this
controlled by a wall switch.
telephone.
The power adapters for the handset charger and the telephone base are different. The power
•
This power unit
adapter for the handset charger is the smaller adapter.
is intended to be
correctly oriented
in a vertical
position. The
prongs are not
designed to hold
the plug in place
if it is plugged
into a ceiling or
an under-the-
table/cabinet
outlet.
9
www.vtechphones.com