Dmx Linking - Chauvet COLORado 1 Tour Quick Start Manual

DMX Linking

DMX
Connection
Master/Slave
Connection
ID
Addressing
COLORado™ 1 Tour Quick Start Guide Rev. 03
The COLORado™ 1 Tour can work with a DMX controller when linked
using a regular DMX serial connection.
If you are not familiar with the DMX standard, please download the
COLORado™ 1 Tour user manual and refer to the DMX Primer and DMX
Connectivity sections in the Appendix chapter.
The COLORado™ 1 Tour uses a regular DMX data connection for its DMX
modes (also known as "personalities"), TOUR, ARC 1, AR1 + D, ARC 2,
AR2 + D, AR2 + S, and HSV. Download the COLORado™ 1 Tour user
manual and refer to the Setup chapter to learn how to connect this fixture
for DMX operation. In addition, refer to its Operation Instructions chapter to
learn in detail how to configure this fixture for DMX operation.
The COLORado™ 1 Tour uses the DMX data connection for its
Master/Slave mode. Download the COLORado™ 1 Tour user manual a and
refer to the Setup chapter to learn how to connect this fixture for
Master/Slave operation, and the Operation Instructions chapter to learn in
detail how to configure this fixture for Master/Slave operation.
The COLORado™ 1 Tour uses the ID Addressing feature to increase the
number of addressable fixtures in the same DMX universe. Download the
COLORado™ 1 Tour user manual and refer to the Operation Instructions
chapter to learn in detail how to configure the COLORado™ 1 Tour fixture
when using ID Addressing.
Setup
7