Configuration
(DMX)
Starting Address
DMX Channel Assignments and Values
Channel
3-CH
Page 10 of 14
Set this product in DMX mode to control it with a DMX controller.
1.
Connect this product to a suitable power outlet.
2.
Turn this product on.
3.
Connect a DMX cable from the DMX output of the DMX controller to the DMX
input socket of this product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you
could restrict the access to some of the product's channels.
The LED Followspot 75 uses up to 3 DMX channels in its 3-channel DMX mode, which
defines the highest configurable address to 510.
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the following:
1.
Press <FUNCTION SELECT> until 001 shows on the display.
2.
Press <UP> or <DOWN> to select your starting address.
Function
1
Dimmer
2
Color
3
Strobe
Value
Setting
255
000
0~100%
031
000
White
063
032
Dark Blue
095
064
Yellow
127
096
Purple
159
128
Green
191
160
Red
223
192
Light Blue
255
224
Orange
255
000
0~100%
LED Followspot 75 User Manual (Rev. 8)