Table of Contents
Advertisement
The Fax Machine
Sending a Fax
490
If the Multiple ID option
is set to ON, the
machine will ask you
which ID to be used for
sending, except for
memory transmission
such as Save Toll,
Delayed Fax and Broad−
casting.
3−2
Sending a fax is very simple if you follow the instructions
starting from here. They will describe how to load the
document, set the resolution/contrast and dial the number.
Loading Document
1
Turn the page face down.
Be sure that your document is dry and free of staples,
paper clips, and other foreign objects. For more
information on what kind of paper you can use for
documents, see "Acceptable Documents (for ADF)" on
page 8−4.
2
Adjust the document guides to match the width of the
document, and load document consisting of up to 15
sheets until the Automatic Document Feeder seizes and
pulls it in. The display will indicate 'DOCUMENT
READY' when it senses that a document has been
loaded.
•
If you are sending more than one sheet, make sure the
bottom sheet enters first. Insert the sheets with a slight
push to ensure smooth feeding.
•
To add pages while faxing, place them over the top
sheet. If you're loading pages that are unusually thick
or thin, feed one sheet at a time. If the document
doesn't feed correctly, open the Control Panel, remove
the document, and try loading it again.
3
Choose the proper resolution and contrast by
pressing Rcv. Mode/Contrast and Resolution
respectively.
•
The default resolution is STANDARD and contrast is
NORMAL.
•
For a normal document, it is not necessary to change
them.
Skip over this step. For more information on Resolu−
tion and Contrast, see "Setting Document Resolution
and Contrast" on page 3−3.
Advertisement
Table of Contents
