Table of Contents
Advertisement
Automatic Dialling
One−Touch Dialling
2−2
One−Touch dialling provides you with quick access to your
most frequently used numbers. Before using One−Touch dial,
you must first store a number into any of ten One−Touch
buttons located on the left of the machine's Control Panel.
Storing a Number for One−Touch Dial−
ling
1
Press and hold a One−Touch button for about two
seconds.
•
If a number is already assigned to the button, the dis−
play briefly shows the number, then asks if you want to
delete.
If you select 'N (No)' and press Start/Enter, the
machine returns to Standby Mode with the old number
untouched.
To delete old number, select 'Y (Yes)', press Start/Enter
and start over.
2
Enter the number you want to store (up to 46 digits).
•
If you want a pause between numbers, press Redial/
Pause; a 'P' appears in the display.
•
If you make a mistake while entering a number, use <
or > to move the cursor under the digit, then enter the
correct digit.
3
Press Start/Enter when the number appears correctly in
the display.
The display asks you to enter a name.
4
Enter the name by using the keypad.
•
If you do not want a name, just skip this step.
You can assign up to 20 characters to a name. For
more information, see "How to Enter Letters" on page
1−9.
5
Press Start/Enter when you're finished.
Advertisement
Table of Contents
