Sending A Fax; Loading Documents; Acceptable Documents - Samsung SF-330 User Manual

Sf-330 series
Hide thumbs Also See for SF-330:
Table of Contents

Advertisement

Sending a fax

Sending a fax is very simple if you follow the instructions starting from here. They will describe how to load the
document, set the resolution/contrast and dial the number.

Loading documents

1
Load your document(s) top down in the document tray with the printed side facing away from you.
• Be sure that your document is dry and free of staples, paper clips, and other foreign objects.
• For more information on what kind of paper you can use for documents, see "Acceptable documents" on page 3.2.
2
Adjust the document guides to match the width of the document, and load
document consisting of up to 10 sheets until the Automatic Document
Feeder seizes and pulls it in. The display will indicate
when it senses that a document has been loaded.
• If you are sending more than one sheet, make sure the bottom sheet enters first.
Insert the sheets with a slight push to ensure smooth feeding.
• If you're loading pages that are unusually thick or thin, feed one sheet at a time. If
the document doesn't feed correctly, open the Control Panel, remove the document, and try loading it again.
3
Choose the proper resolution and contrast by pressing

Acceptable documents

Document size
Max
Min.
Effective scanning width
Number of sheets which can be loaded at a time
Thickness of document
Paper quality
For multiple sheets, all pages of the document must be the same size and paper type.
DO NOT try to send documents that are:
• wet
• covered with wet ink or paste
• wrinkled, curled, or folded
• too thin (less than 0.07mm thick-onionskin, airmail paper, etc.)
• too thick (more than 0.15mm thick)
• chemically processed (pressure-sensitive paper, carbon-coated paper, etc.)
• coated (glossy, etc.)
• too small or short (such as a label, voucher, etc.)
• made of cloth or metal
To send these documents, use an office copier to make a photocopy first, and then send the copy.
3.2
Document Ready
Rcv.Mode/Contrast
Single sheet
216mm (W) x 356mm (L)
148mm (W) x 128mm (L)
210mm
-
0.07mm ~ 0.15mm
Uncoated on both sides
Document
Guide
and
respectively.
Resolution
2 or more sheets
216mm (W) x 297mm (L)
Up to 10
0.075mm ~ 0.12mm

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sf-331pSf-335t

Table of Contents