Table of Contents
Advertisement
490
Note these instructions
assume that the display
is asking you to enter a
name.
Keypad Character
Assignments
Key
1
(Space) 1
2
A B C 2
3
D E F 3
4
G H I 4
5
J K L 5
How to Enter Letters
1
Press the appropriate button for the letter you want.
The letter appears in the display.
•
To enter an O, for example, press the 6 button three
times. Each time you press the button, the display
shows a different letter: first M, then N, and O, and
finally 6.
•
For a list of letters and corresponding buttons, see
"Keypad Character Assignments" below.
2
Select additional letters in the same way.
The blinking cursor moves right and the next letter
appears in the display.
•
If the additional letter is in the middle of or at the end
of the letters assigned to the button you have pressed,
move the cursor by pressing < or > , then press that
button.
3
Press Start/Enter when you're finished entering letters.
Assigned numbers, letters, or characters
6
7
8
9
0 (Symbols)
Time/Date Setup
The current date and time are shown in the display when the
machine is on and ready for use (Standby Mode). The date
and time will be printed on all faxes you send.
1
Press Setup.
2
Press < or > to choose 'TIME/DATE SETUP' and press
Start/Enter.
Setup and Copying
M N O 6
P Q R S 7
T U V 8
W X Y Z 9
+ − , . ' / * # & 0
1−9
Advertisement
Table of Contents
