Canon R-F10 Operation Manual page 3

Safety Information
Regulations
For U. S. A.
This instrument is a CLASS I EQUIPMENT and TYPE B APPLIED PARTS according to
UL2601-1.
Do not make any changes or modifications to the equipment unless otherwise specified in
the manual.
If such changes or modifications should be made, you could be required to stop operation of
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Use of shielded cable is required to comply with class A limits in Subpart B of Part 15 of FCC
rules.
For Canada
This equipment complies with the Canadian ICES-003 class A specifications.
For EU Countries
This instrument is a Class I Equipment with measuring function.
This is a Group 1, Class B equipment according to EN55011.
The following mark shows compliance of the instrument with Directive 93/42/EEC.
Für Deutschland
Während des Betriebs liegt der Schalldruckpegel dieses Instruments bei 70 dB(A) oder
weniger gemäß ISO 7779.
(1)