Entering Message For Internal Printer (Page: 3/3); About The Display - Canon R-F10 Operation Manual

6.3 Entering Message for Internal Printer (Page: 3/3)

Enter a message to be printed out with the result of measurement with the internal printer in
this display. You can enter messages in 18 characters × 4 lines.
Message is backed up by battery, and will be retained even if power is turned OFF.
Position cursor
Character cursor
Character list
Deletion message

6.3.1 About the Display

Position cursor:
Character cursor:
Character list:
Deletion message:
6.3 Entering Message for Internal Printer (Page: 3/3)
– SET MODE –
PRINT MESSAGE
← →
• • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • •
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
ÀÁÂÃÄÆÇÈÉÊËÌÍÎÏÑÒÓÔÖÙÚÛÜ
àáâãäæçèéêëìíîïñòóôöùúûüß
0123456789sp
! " # $ % ' ( ) * + , – . / : ; < = > ? @ [ ]
CHAR CLEAR / LINE CLEAR / ALL CLEAR
←
→
– – –
END PAGE– PAGE+
Square in the message entering area is called a position cursor.
Input will be made at the place where the cursor is located.
Position cursor moves to left by pressing
pressing switch.
VD
Square in the character list or deletion message is called a character
cursor.
Character being selected with character cursor will be entered.
Or, deletion operation can be selected from the deletion message with
the character cursor.
Character cursor moves to right or left by turning the roller.
A list of characters that can be entered is displayed here.
Line that includes the required character can be selected by pressing
PRINT switch. Character can be selected by turning the roller.
For details, see section 6.3.4.
– – –
– – –
INS
DEL
– 31 –
PAGE: 3/3
LINE↓
PUT
IOL switch, and to right by