Canon R-F10 Operation Manual page 42

6.2 Settings for Printing and Transfer (Page: 2/3)
[FMT]
[BAU]
CHARACTER
Press AUTO switch to proceed page 3/3.
Press MANU. switch to return to page 1/3.
Press SET switch to return to measurement mode.
Transfer format
NOTE: For details concerning format, please contact Canon
representative or distributor.
[How to change the setting]
Press either switch or
START
RS232C data transfer speed and data format
9600.8N1
9600: Transfer speed "
8: Transfer bit "
N: Parity " E , O ,
1: Stop bit " ,
1 2
[How to change the setting]
(1) Turn the roller or press
speed or transfer format.
(2) Press either START
The type of characters displayed for entering message on page 3/3 can
be selected.
" JIS ": Japanese characters will be displayed.
" ": Characters such as with umlaut will be displayed. For
LATIN-1
details, see the illustration of the monitor in section 6.3.
– 30 –
switch.
PRINT
300 , 600 , 1200 , 2400
, "
7 8
N "
"
IOL switch or VD
switch or PRINT switch to change the setting.
, 4800 , 9600 , 19200 "
switch to select transfer