Table of Contents
Advertisement
6.2.2 Items
PRINT
[FMT]
[MSG]
[EYE]
[ECO]
TRANS
6.2 Settings for Printing and Transfer (Page: 2/3)
Whether to print the result
"
":
Results are printed with the internal printer of the R-F10.
ON
"
": Not printed.
OFF
Results of refractometry to be printed out.
Regardless of whether "
will be printed when
onds, or when measurements vary widely and the reliability of any
one of the measurements is low when "
"
":
Standard values
STD
"
":
10 newest measurements and a standard value for each
MEM
eye in memory
"
":
In case of small dispersion of the data, the standard value
AUTO
is printed. Otherwise, the standard value and all data are
printed.
Whether to print the messages entered in section 6.3
"
":
Messages are printed.
ON
"
": Not printed.
OFF
Whether to print a sketch of eyeball and refraction diagram according
to the results of refractometry
"
ON
":
A sketch of eyeball and refraction diagram are printed.
"
": Not printed.
OFF
Reduction of printout
"
ON
":
The size of printout will be reduced.
"
": Non-reduction
OFF
[How to change the setting]
Press either
START
Whether to transfer the measurement data to external instrument or
not
NOTE: Please contact Canon representative or distributor when
connecting external instrument to the R-F10.
"
":
Data is output in RS232C interface. Data that can be output
ON
are: results of refractometry, pupil distance and measure-
ment date.
"
":
For no transfer.
OFF
– 29 –
" or "
" is selected, data for "
STD
AUTO
switch is pressed for more than 2 sec-
PRINT
AUTO PRINT"
switch or
PRINT
switch.
"
MEM
is
".
"ON
Hide quick links:
Advertisement
Table of Contents
