Canon R-F10 Operation Manual page 63

Full auto ref
Table of Contents

Advertisement

2. Do not lay the instrument on its side with the power turned ON. Otherwise, the
instrument may malfunction.
3
Connect the power supply cable to the instrument
Hold the instrument firmly with your hand and securely connect the power supply
cable to the power supply connector on the bottom of the instrument (→ section 3.2).
4
Set up the instrument
5
Connect the power supply cable to an AC outlet
6
Place the chin rest paper on the chin rest
→ Section 7.4.1
7
Load the printing paper into the printer
→ Section 7.4.2
8
Customize the settings as required
Change the order of measurement modes and the settings concerning the measurement
as required (→ chapter 6).
9
If you are using external equipment
Please contact Canon representative or distributor.
8.1 Installation
– 51 –

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents