Measurements Stored In Memory [Display Mode] - Canon R-F10 Operation Manual

5. Measurements Stored in Memory [DISPLAY Mode]

In DISPLAY mode, you can see the results (maximum of 10 data for each eye) of measure-
ments stored in memory.
Press switch in order to enter DISPLAY mode.
DISP
Press it again to go out.
Results of
refractometry
Standard value
[How to change the order of refraction]
Press switch.
IOL
The order of data will change starting from larger number of SPH with + sign (i.e. from
stronger hyperopia) and ending with larger number with - sign (i.e. stronger myopia).
Press switch again in order to return to the original order.
IOL
[[How to change vertex distance]
Press VD switch.
[[How to print the data in the condition displayed]
Press
PRINT
[How to delete all data]
NOTE: When data are deleted from DISPLAY Mode, they will also be deleted from
the measurement mode.
Press R/L switch. Confirmation meassage will appear.
Press
START
RIGHT PD: 67
SPH CYL
1 –0.37 –0.75
2 –0.50 –0.75
3 –0.50 –0.75
4
5
6
7
8
9
10
[ –0.50 –0.75
END SORT VD
– – – – – –
– – –
switch.
switch to delete, or
PRINT
– DISPLAY MODE –
LEFT VD: 13.5
No. 00001
AX SPH CYL
37 –0.62 0.00
36 –0.75 0.00
36 –0.75 0.00
36 ] [ –0.75
CLEAR
– – –
– – –
– – –
– – –
switch to cancel.
– 23 –
AX
180
180
180
0.00 180 ]
PRINT
– – –