Figure 2.3:Power Receptor And Button Pin Assignments - Advantech TPC-1070 User Manual

Figure 2.3: Power receptor and button pin assignments
Step 4: Plug the power lines to the system power receptor.
Step 5: Push the power button to power on the system as the figure 2.4.
Step 6: Calibrate the touchscreen. Please go to:
"Start" "Settings" "Control Panel" as the figure 2.5. Then, click the
tab "Stylus -> "Calibration" -> "Recalibrate" to calibrate by selecting the
standard calibration or advanced calibration.
If your operating system is Windows CE, the details of the procedure are
described in following section.
11 Chapter 2