Mitel 1000 Owner's Manual page 75

Select the extensions that are to be allowed to use remote
notification .
Selecting the Number of Simultaneous Calls
The number of simultaneous remote notification calls can be set at
1 or 2.
From the Programming extension, press the PROGRAM key.
Press the Scroll Down key ( ) until "System Programming" is
displayed.
Select "System Programming".
Enter the System Programming Password and select "System".
Select "Remote Notification".
Select "Simultaneous Calls".
Enter the value 1 or 2 and press "Confirm".
The default value is set at 1.
Selecting the Number of Retry Attempts
From the Programming extension, press the PROGRAM key.
Press the Scroll Down key ( ) until "System Programming" is
displayed.
Select "System Programming".
Enter the System Programming Password and select "System".
Select "Remote Notification".
Select "Retry attempts".
Enter the value from 2 to 15 and press "Confirm".
The default value is set at 2.
Selecting the Line Group that the Remote Notification calls are to
use
The outgoing line group to be used for remote notification calls can
be changed.
From the Programming extension, press the PROGRAM key.
Press the Scroll Down key ( ) until "System Programming" is
displayed.
Select "System Programming".
Enter the System Programming Password and select "System".
Select "Remote Notification".
Select "Outgoing group".
Select the group.
Notification delay timer
The time interval between receiving a message and making the first
remote notification attempt is programmable. This is set at 15
minutes (900 seconds) in default and can be set between 1 and 30
minutes (60 - 1800 seconds).
From the Programming extension, press the PROGRAM key.
Press the Scroll Down key ( ) until "System Programming" is
displayed.
Select "System Programming".
Enter the System Programming Password and select "System".
Select "Timers".
Select "Notification Delay".
Enter the value between 60 and 1800 seconds and press "Confirm".
Notification interval timer
If a remote notification fails this is the time the system waits before
retrying the call. This is set at 5 minutes (300 seconds) in default.
The range is 1-15 minutes (60 - 900 seconds).
75