Mitel 1000 Owner's Manual page 25

Select the required option – 'Set auto answer' or 'Cancel auto
answer', to set and cancel the Automatic answer mode respectively.
Press the Speakerphone Key to finish programming.
To program a feature onto a programmable key on your extension
You may re-program any or all of the 4 Programmable Keys located
on the Desk Phones (that are not used as line keys) . You can
program these keys to select extensions, features or speed dial
numbers.
From your Desk Phone, press the PROGRAM Key
Press the Scroll Down Key ( ) until 'Key Programming' is
displayed.
Select 'Key programming'.
Press the Programmable Key to be programmed. A list of options
appears on the display.
Select the required feature to be programmed onto the key. Use
the Scroll Down Key ( ) to scroll down to view the list of available
features. For example, to program the key with a speed dial
number, select the 'Individual digits' option.
Press the Speakerphone Key to finish programming.
If you are programming the key to call an external number
remember to precede the number with a
Note
select a CO line.
To turn on Headset Mode
You turn Headset mode on and off via the PROGRAM Key
From your Desk Phone, press the PROGRAM Key
Press the Scroll Down Key ( ) until 'Headset Mode' is displayed.
Select 'Headset mode'.
Select the required option – 'Headset on' or 'Headset off'. Once
selected, the display will show 'Headset On' or 'Headset Off' and
then revert to the Idle Menu.
Press the Speakerphone Key to finish programming. The options to
Turn headset On, and turn Headset Off are shown on the Idle
display.
The handset does not operate in Headset Mode.
To set a ringing tone on your Desk Phone
You can select one of three ringing tones.
From your Desk Phone, press the PROGRAM Key
Press the Scroll Down Key ( ) until 'Ringing Options' is displayed.
Select 'Ringing options'.
Select 'Tone 1', 'Tone 2', 'Tone 3', which will cause the selected
tone to sound.
Select 'Confirm' to use the chosen tone. On the display 'Ring type
set' will appear and then the display will revert to the Idle Menu.
Press the Speakerphone Key to finish programming.
To set the display contrast on your Desk Phone
You may choose from four levels of display contrast.
From your Desk Phone, press the PROGRAM Key
Press the Scroll Down Key ( ) until 'Contrast Options' is displayed.
Select 'Contrast options'.
Select 'Level 1', 'Level 2', 'Level 3' or 'Level 4' to set a contrast
option. The prompt 'Contrast set' appears on the display.
25
9 to select an IP line or 8 to