Mitel 1000 Owner's Manual page 65

Press the Scroll Down Key ( ) until 'Caller ID List' is displayed.
Select 'Caller ID List'.
Select 'Store All Calls' or 'Store Unanswered Calls'.
Press the Speakerphone Key to finish programming.
To set up extensions with an individual Caller ID List
You can program up to twelve extensions to store five numbers
each. Each of these extensions will have a separate record of calls
that ring on CO lines programmed to ring their extensions only.
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key ( ) until 'System Programming' is
displayed.
Select 'System Programming'.
Enter the System Programming Password and select 'Extensions'.
Press the Scroll Down Key ( ) until 'Personal Caller ID List' is
displayed.
Select 'Personal Caller ID List'.
Select the extensions that you wish to have an individual Caller ID
list. The extensions with a Personal Caller ID list have a ♦ displayed
beside them.
Press the Speakerphone Key to finish programming.
Automatic line selection
This facility allows users to make external calls without having to
enter the line access codes (9, 8). This is the default for your
system.
Internal calls from a Desk Phone are made by selecting Internal Call
selecting the extension from the list of extensions. Internal calls
made from a Cordless Phone are made by pressing the INT key
and then entering the extension number.
Press the Scroll Down Key ( ) until 'System Programming' is
displayed.
Select 'System Programming'.
Enter the System Programming Password and select 'System'
Select Automatic Line selection and select 'Automatic Line selection
On'.
Paging
To protect Desk Phones against Announcements and Voice Calls
By default, all Desk Phones may be paged. You can page-protect
each Desk Phone to prevent it from being paged from either
Announcements or Voice Calls.
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key ( ) until 'System programming' is
displayed.
Select 'System programming'.
Enter the System Programming Password and select 'Extensions'.
Select 'Page protection'
Select the extensions you wish to protect. A ♦ is displayed beside
protected extensions.
Press the Speakerphone Key to finish programming.
65