Philips ProntoPro User Manual page 9

Selecting Brands and Code Sets
A list of brands and their corresponding RC codes are stored in the Remote Control's memory.
You have to select your brand from the list. Because not every device of a certain brand uses the same RC codes, you
might also have to select a set of RC codes for your brand.
1. Tap Next.
A scrollable list of brands for the selected device and a "virtual auto-zooming" mini-keyboard appears.
2. Navigate through the list of brands using the scroll buttons
• By tapping the scroll buttons, you scroll through the brands one by one.
• By holding down the scroll buttons, the scrolling speed increases.
-or-
Navigate through the list of brands using the mini-keyboard to jump through the list of brands.
• To enter a character, tap the keyboard near the character you want to use.
The keyboard is zoomed in, allowing you to tap exactly the character you need.
After you have tapped the character, the keyboard is zoomed out. Repeat this action for every character.
You can zoom out again without tapping a character by pressing the right action button (labeled Zoom).
• To delete a character, press the right action button (labeled Del).
• To enter a space, tap the lower left corner of the keyboard. When the keyboard is zoomed in, tap the empty key.
Every time you enter a character the list displays the brands that match the character(s). The Remote Control
makes a pre-selection of the (first) matching brand. You only have to type as many characters as needed to
display your brand.
When your brand is not displayed in the list of brands, you can use Search mode. See "Searching Brands and
Code Sets" on p. 11.
Getting Started
and to scroll up or down in the list of brands.
9