Philips ProntoPro User Manual page 34

9. Enter the command the timer has to execute.
10. Tap the clock button and set the stop time using the action buttons.
11. Press the left action button (labeled Close) to close the timer.
A confirmation screen appears where you can save or cancel the timer.
12. Tap Save.
You return to Use mode and the timer is activated.
The timer only works when the Remote Control's sending eye is pointed towards the controlled device and no
obstructions interfere the infrared signal.
When a timer command is executed, the Alarm icon
Editing Timers
You can edit any timer you have set.
1. Open the timer group that contains the timer.
2. Switch to Edit mode via the Remote Control icon
3. Tap the timer you want to edit.
The contents of the timer appear.
4. Edit the timer.
5. Press the left action button (labeled Close) to close the timer.
A confirmation screen appears where you can save or cancel the timer.
6. Tap Save.
The timer is edited.
Adding Macro Groups and Timer Groups
You can create as many macro groups or timer groups as you like. Each group can contain up to 25 macros or timers.
1. Open any macro or timer group.
2. Switch to Add mode via the Remote Control icon
You can create a new group, copy an existing group or restore a previous deleted group.
• Create New Group: You add a new group in which you can record new macros or set new timers.
• Copy Existing Group: You copy a group and its macros or timers and use it for new macros or timers.
• Restore Deleted Group: You restore a deleted group and reuse the macros or timers.
3. Tap Create Macro Group or Create Timer Group.
A new macro group or timer group is added.
To add macros in a macro group, see "Recording Macros" on page 31.
To add timers in a timer group, see "Setting Timers" on page 32.
To organize macro groups or timers groups, see "Moving Devices, Macro Groups or Timer Group" on page 28.
Getting the Maximum out of it
appears on the Remote Control icon.
.
.
33