Getting The Maximum Out Of It - Philips ProntoPro User Manual

Disabling the Mode menu
To prevent accidental changes to the Remote Control interface and commands, you can disable the Mode menu.
1. Make sure the Remote Control is in Use mode.
2. Touch and hold the Remote Control icon for a few seconds.
The Remote Control switches to Setup mode.
3. Scroll down to the second setup panel.
4. Tap the Mode Menu button.
The label on the Mode Menu button changes to "Mode Menu Off".
5. Tap the Remote Control icon
The Remote Control switches to Use mode.
When you tap the Device tab or the Macro tab from within the Setup panel, you exit Setup Mode and the
Remote Control immediately switches to the selected menu.
There is no visual feedback to indicate that the Mode menu is disabled. This means that the Mode menu will not appear
when you tap the Remote Control icon.
To enable the Mode menu again, return to Setup mode and turn the Mode Menu button back on.

Getting the Maximum out of it

.
20