Checklist Maiden Flight; Checklist Regular Flights - Heli-Professional REVOLUTION 500E Manual

Rtf w/o transmitter

Hide thumbs Also See for REVOLUTION 500E:

Assembly instruction and manual (21 pages)

User manual (40 pages)

Additional technical manual (12 pages)

Table of Contents

· The battery must neither be overcharged nor exhausted. The battery is totally damaged and cannot be used an-

ymore in case of an exhaustive discharge. Therefore do not exceed following flight times:

Flight Style

Hover

Basic Flight

Aerobatics

* Please note: the max. flight time will be shorter in cold condition or with old batteries.

· Heli Professional will not accept responsibility for any damage or secondary failures caused by inappropriate use

and rejects any liability, as we are not in a position to supervise proper operation, handling, and maintenance.

Attention: This checklist is supposed to give you a short overview of the preparations for the maiden flight and does

not replace the contents of this manual.

· Unbox and check all parts for damage.

· Check if all screws are fully tighten

· Check if all connectors are plugged in securely

· The main blade screws must be tightened until the blades can only be moved with a lot of force

· Charge the battery with the included charger according to the instructions. Notice the safety instructions and pay

attention to the correct polarity of the charger, the balancer and the ESC of the model.

· Insert AA batteries into the Transmitter. Do not change the settings of the transmitter in any way!

· Position and tighten the fully charged battery according to the picture on the battery plate with the included

hook and loop fasteners and secure it with O-rings in the helicopter model.

· Secure the balancer plug under the hook and loop fastener according to the picture.

· Test all functions of the model. The FBL-3X system and the transmitter are already programmed. No further set-

tings are required.

· The initial startup should be done on an appropriate airfield. Local clubs generally offer the best possibilities for

safe and fun helicopter flying.

Attention: This checklist is supposed to give you a short overview of regular flights and does not replace the contents

of this manual.

· Check all connections and screws before every flight

· Secure the battery with O-rings in the battery rails and connect the ESC with the battery.

www.heli-professional.com

3D Mode

Off