Presetting Radio Stations Manually; Receiving Preset Stations; Receiving Preset Stations In Order - Kenwood KRF-V6030D Instruction Manual

Presetting radio stations manually

22
The RDS auto memory function assigns preset numbers to RDS stations
starting from preset number "1". Therefore, be sure to execute the RDS
auto memory function before using the following operations to manually
store AM stations and other FM stations, and RDS stations.
"Presetting RDS stations (RDS AUTO MEMORY)".
MULTI CONTROL
KRF-V6030D/
V5030D/
V4530D
1
Tune to the station you want to store.
2
Press the MEMORY key while receiving the station.
Blinks for 5 seconds
SP A B TI.VOL
L C R
CLIP MUTE
LFE SW
RDS EON PTY
LS S RS
TP TA NEWS
3
3
Use the MULTI CONTROL to select one of the station
presets (1 – 40).
4
Press the MEMORY key to accept the setting.
• Repeat steps 1, 2, 3, and 4 to store as many stations as necessary.
• If you store a station at a previously used preset, the old station will
be replaced by the new one.

Receiving preset stations

Numeric keys
TUNER
RC-R0610
1
Press TUNER to select the tuner as the source.
MEMORY
Lights for 5 seconds
FM AUTO SOUND DIGITAL
AM PRO LOGIC S.DIRECT
MHz 3 STEREO MONITOR
kHz DOWN MIX DSP
Numeric keys
TUNER
RC-R0510
2
Enter the number of the preset you want to receive (up to
"40").
¡
• If you make a mistake entering a two digit number, press the
several times to return to the original display and start again.
SP A B TI.VOL
CLIP MUTE
RDS EON PTY
TP TA NEWS

Receiving preset stations in order

AUTO
MEMO
P.CALL ¤ / ‹
ST.
TUNED
TUNER
1
Press TUNER to select the tuner as the source.
2
Use the P.CALL keys to select the desired station.
• Each time you press the key, another preset station is received in
order.
= = =
+ + +
Listening to radio broadcasts
0 5
0 0 )
L C R
LFE SW
LS S RS
P.CALL ¤ / ‹
TUNER
RC-R0610 RC-R0510
= = = = = =
¤
+ + + + + +
key
FM AUTO SOUND DIGITAL AUTO
AM PRO LOGIC S.DIRECT MEMO
MHz 3 STEREO MONITOR ST.
TUNED
kHz DOWN MIX DSP
(P.CALL)