Wired Settings; Wireless Settings; Traffic Statistics - Cisco Small Business AP541N Administration Manual

2

Traffic Statistics

24

Wired Settings

The Wired Settings include the MAC address, management VLAN ID, IP address,
subnet mask, and DNS information. To change any of these settings, click Edit to be
redirected to the Setup > LAN Settings page.
For information about configuring these settings, see

Wireless Settings

The Wireless Settings section indicates the status of the wireless radio, and
includes the Radio Mode and Channel. The Wireless Settings section also shows
the MAC address (read-only) associated with each wireless radio interface.
To change the Radio Mode or Channel settings, click Edit. You are redirected to the
Wireless > Radio Settings page.
For information about configuring these settings, see
Settings, page 47 and
The Traffic Statistics page provides basic information about the access point, a
real-time display of the transmit and receive statistics for the Ethernet interface,
and VAP (Virtual Access Point) statistics. The transmit and receive statistics are
totals since the access point was last started. If you reboot the access point, these
figures indicate transmit and receive totals since the reboot.
To view transmit and receive statistics for the access point, click the Traffic
Statistics tab. Click Refresh to refresh the page.
Modifying Advanced Settings, page
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Traffic Statistics
LAN Settings, page
Modifying Wireless Radio
74.
Status
35.