Rebooting The Access Point; Software Upgrade; Upgrading The Software By Using Tftp - Cisco Small Business AP541N Administration Manual

Administration

Software Upgrade

Software Upgrade
NOTE
NOTE
STEP 1
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
The access point reboots. A reboot confirmation dialog and follow-on rebooting
status message displays. Please wait for the reboot process to complete, which
might take several minutes.
The Configuration Utility is not accessible until the access point has rebooted.

Rebooting the Access Point

For maintenance purposes or as a troubleshooting measure, you can reboot the
access point. To reboot the access point, click the Reboot button on the
Configuration page.
As new versions of the access point software become available, you can upgrade
the software on your devices to take advantage of new features and
enhancements. The access point uses a TFTP client for software upgrades. You
can also use HTTP to perform software upgrades.
When you upgrade the software, the access point retains the existing configuration
information.
By default, the access point uses HTTP for software upgrades instead of TFTP.

Upgrading the Software by using TFTP

Use the following steps to upgrade the software on an access point by using
TFTP:
Click the Software Upgrade tab in the Administration section.
Information about the current software version is displayed and an option to
upgrade a new software image is provided.
6
117