3.3. CHG 4001 (Charging Cradle for OPI 4002 Handheld Scanner)
Figure 5 and Table 3 describe the handheld scanner charging cradle and its
components.
ID#
1.
Scanner identification serial number
2.
Electrical contacts (+)
3.
Electrical contacts (-)
4.
DC jack
5.
AC adaptor cable guide
Battery Charging Time
3.3.1.
The scanner battery must be fully charged before use. A completely discharged
battery can be fully recharged in approximately three hours.
Figure 5: CHG 4001 charging cradle
Name
Table 3: CHG 4001 charging cradle components
Functions
Identifies product and serial number.
Positive contact feed powering the electrical contacts of
the scanner.
Negative contact feed powering the electrical contacts of
the scanner.
Connect the dedicated AC adaptor.
Install the dedicated AC adaptor cable along the guide.
12
Opticon
OPI 4002
Instruction Manual