Print Test Contents - Olivetti PR2 E Service Manual

3.3.2 PRINT TEST CONTENTS
The print test provides the following information:
-
The release and version of the firmware and character generators installed
-
A graphical represetnation of 24-needle functionality (Needles test)
-
The configuration of the printer
-
The parameters defined for the IBM-PP and Olivetti emulations.
To stop the print test, power off the printer
The following pages provide examples (Fig. 3-3 and Fig. 3-4) of the information provided by the tests.
The content of the test depends on the FW release installed on the printer.
Y 1002509 Service Manual 3-5