Conflgllratlon Parameters; Configuration Mode Menu Parameters - Olivetti PR2 E Service Manual

4.3.3 CONFlGLlRATlON PARAMETERS
This section provides the description and possible values of the printer's different set-up parameters.
' T he default value is indicated in bold.
4.3.3.1 CONFIGURATION MODE MENU PARAMETERS
DRAFT SPEED: NORMAL
-
HIGH
LQTYPE: NLQl
-
NLQ2- LQ2
Determines the Draft mode that can
activated via SW and by default.
Determines the LQ type that can be
activated via SW and by default
I r
PAPER WIDTH: FIRST LINE - PROGRAMMABLE
Determines document positionlwidth
measurement position.
BUZZER: N - Y Activatesldeactivates acoustic signaling
INTERFACE: RS 232 (1)
-
OPTIONAL - DUAL
The optional interfaces are:
-
PARALLEL (DUAL-compatible)
-
RS 232 (2) (DUAL-compatible)
-
USB
(when) RS232C (1)
EMULATION: OLIVETI-I
-
IBM Interface default emulation
Qll
BAUD RATE: 9600
-
4800
-
2400
-
1200 Data transmissionelreception rate
BITICHAR: 7
-
8 7- or 8-bit data format.
PARITY: NONE
-
ODD
-
EVEN Type of parity checking.
STOP BIT:
1 -
2 Number of stop bits
DSR: N - Y Data Set Ready handled or not.
DCD N - Y Data Carrier Detector handled or not.
Y 1
00250-4 Service Manual 4-3