3.7.5.2 REPLACING THE RIBBON CARTRIDGE WITH THE MACHINE POWERED OFF
The ribbon cartridge can be changed with the machine powered on and by following the procedure listed
below:
-
Open the printer cover; printing stops automatically.
-
Lift the upper mechanical assembly by using the appropriate lever.
-
Remove the used cartridge and replace it with a new one as previously described.
-
Lower the upper machanical assembly by using the appropriate lever.
-
Close the printer cover.
Note: DO NOT move the printhead manually.
3.7.6 PAPER JAMS
The paper could jam along its path inside the machine.
Jamming could be caused by one of the following:
-
Obstructed paper path (for example, residual pieces of paper)
-
Paper skew
-
Paper weight or size non-compliant with the specifications
-
Crumpled, folded or badly preserved paper
-
Stapled paper or with paper clips (this can seriously damage the machine)
-
Multicopy forms where the sheets are poorly glued together.
' T he areas where jams are more likely to occur are:
-
front document feed slot
-
inside the printer
-
rear document output slot