Functions Of The Console Buttons - Olivetti PR2 E Service Manual

2.2.1 FUNCTIONS OF THE CONSOLE BUTTONS
The buttons on the console perform the following functions:
STATION l : Reserves operator 1 (Olivetti STD 12/14) or assigns the printer to
operator 1 (' )
STATION 2: Reserves operator 2 (Olivetti STD 12/14) or assigns the printer to
operator 2 (' )
LOCALIBREAK: Toggles the printer between the on-line and off-line states
EJECT (ST. l ) : Ejects the paper of operator 1 or ejects the paper present (' )
EJECT (ST. 2): Ejects the paper of operator 2 (' )
(' ) According to the selected emulation.
You can access the different machine states by powering on or resetting the printer while holding down
one or more buttons. The buttons assumedifferent functionsdepending on whether the printer top cover
is opened or when the printer is powered on or reset while holding down determined console buttons.
The following table provides the meaning of the console buttons in both cases.
Local
1
ST. 1
1
ST. 2
1
z ; w ; r
1
MACHINE STATE
Print test
Clear paper jam procedure
Printer set for the on-line updating of the firmware
(onto Flash-EPROM)
Access to the following procedures:
a) Photosensor adjustment
b) User TOF setting
c) Left-hand margin setting
d) Paper or savings book length measurement
e) Print alignment adjustment
f) Photosensor adjustment printout
X
1 1 I
X
1
Disable cover open signal
Service Manual