Avaya 3600 Series User Manual page 11

6. Down:
To decrease the speaker and/or ring volume of your phone, press the Down button whilst the phone is in use. You
can also use Down to navigate menu items.
7. Softkeys:
Used to navigate to or initiate certain features as well as control certain actions within the features. These keys
correspond to the text prompts in the display screen immediately above them.
8. Power On/Start Call:
Used to turn your phone on. Press and hold Power On until two chirps sound (approximately one second). Release
the key. The in-service tone sounds and your extension number is displayed. The phone is now on standby mode. To
make and receive calls, press Power On again.
9. Battery Release: You can release your phone's battery (to charge) by pressing both left and right battery release
buttons at the same time.
10. FCN:
Used to display the Standby menu enabling you to set various preferences such as, system information and ring
options. When in standby mode (on, but not in use), press and briefly hold FCN to display the Standby menu.
11. Charging Contacts:
Provides a contact between your phone and a charger when your phone is placed, facing forward, in a charger.
12. Headset Jack:
Located at the bottom of the phone. Provides a port for connecting a headset.
13. LINE
If multiple lines are available, your phone system may require you to select a line before dialing a number. Press
LINE and the number key of the line you wish to use. A dial tone is heard.
14. MENU:
This button is unavailable.
15. Power Off/End Call:
To turn your phone off, press and hold Power Off. One chirp sounds and the phone turns off. Your phone cannot be
directly turned off during a call, you must end the call first and then turn the phone off.
16. Softkey Function Display Area:
The information displayed varies according to the corresponding softkey pressed. The five softkeys are Transfer,
Conference, Hold, Mute and Redial. Press the left or right side of the key to activate the corresponding softkey
feature. See Using the Softkeys
17. Push-to-Talk Radio Control:
Used for incoming and outgoing radio communication by utilizing a common channel. You can enable any PTT
channel by entering the corresponding number from the keypad. The default channel is the lowest allowed channel
as set in the Admin menu.
18. Shortcut Menu and Main Display Area:
The Shortcut Menu lists the feature shortcuts and descriptions. When in standby mode (on, but not in use), press
and briefly hold FCN to display the Standby menu.
19.
Indicates the amount of charge remaining in the battery pack. The level indications are approximations of the
remaining battery pack life, they do not indicate equal amounts of battery pack life. When only one level remains,
the battery pack needs to be changed.
Battery Low - This message is displayed and an alarm sounds when the phone is in standby mode and the battery
pack is critically low. The phone cannot be used until the battery pack is charged.
Backlight:
·
The backlight comes on when any key is pressed or when there is an incoming call and stays on for ten seconds. It
turns off after ten seconds if another key is not pressed within that period.
3600 Phones
IP Office
.
20
Battery:
The Wireless Phone: The 3626 Wireless Phone
15-601104 Issue 02b (08 September 2008)
Page 11