Setting The Timer - Teac TD-X300i Owner's Manual

< The unit can be programmed to turn on and off at a specified
time.
< Adjust the clock before setting the timer.
1 Press and hold the TIMER button until the TIMER indicator
and "ON" appear on the display.
The "hour" value starts flashing.
< When no button is pressed for 10 seconds, the timer setting
mode will be cancelled.
2
Press the skip button (.//) to set the start time
(hour), and then press the TIMER button.
The "minutes" value starts flashing.
28

Setting the Timer

STANDBY/
ON
TIMER
.//
3 Press the skip button (.//) to set the start time
(minute), and then press the TIMER button.
"TIMER" and "OFF" indiactors appear on the display and the
"hour" value starts flashing.
4
Press the skip button (.//) to set the stop time
(hour), and then press the TIMER button.
The "minutes" value starts flashing.
5 Press the skip button (.//) to set the stop time
(minute), and then press the TIMER button.