Setting The Timer - Teac MC-DX40DAB Owner's Manual

The unit can be programmed to turn on and off at a specified
<
time.
Adjust the clock before setting the timer.
<
1 Press and hold the TIMER button until "TimerOn" appears
on the display.
The "hour" value starts flashing.
When no button is pressed for 60 seconds, the timer setting
<
mode will be cancelled.
2 Press the skip button (.//) to set the start time
(hour), and then press the TIMER button.
The "minutes" value starts flashing.


Setting the Timer

STANDBY/ON
TIMER
/
3 Press the skip button (.//) to set the start time
(minute), and then press the TIMER button.
"TimerOff" appears on the display and the "hour" value starts
flashing.
4 Press the skip button (.//) to set the stop time
(minute), and then press the TIMER button.
The "minutes" value starts flashing.
5 Press the skip button (.//) to set the stop time
(hour), and then press the TIMER button.