Setting The Timer - Teac MC-DX25 Owner's Manual

Adjust the clock before setting the timer.
If the power switch of the subwoofer turned off, the
settings kept in memory (clock, preset stations, timer
setting) will be erased.
1 Press and hold the TIMER button until 'TIMER' and 'ON'
indicators appear on the display.
The 'hour' value starts flashing.
< When no button is pressed for 10 seconds, the timer setting
mode will be cancelled.
2 Press the SKIP button (.//) to set the start time
(hour), and then press the TIMER button.
20
Timer
The 'minutes' value starts
flashing.
3 Press the SKIP button (.//) to set the start time
(minute), and then press the TIMER button.
4
Press the SKIP button (.//) to set the stop time
(hour), and then press the TIMER button.
5 Press the SKIP button (.//) to set the stop time
(minute), and then press the TIMER button.
6 Press the SKIP button (.//) to select a source (CD
or TUNER), and then press the TIMER button.
'TIMER' and 'OFF' indiactors
appear on the display and the
'hour' value starts flashing.
The 'minutes' value starts
flashing.