Am Loop Antenna; Video Out Terminal - Teac TD-X300i Owner's Manual

A

AM loop antenna

Position the antenna for the best sound.
If you want, you can hook the AM antenna on a wall as shown
below:
B FM antenna
While in FM mode, tune in an FM station and extend the lead
to find the best position for reception. This antenna may need
to be repositioned if you move your unit to a new location.
FM Outdoor Antenna
In an area where FM signals are weak, it will be necessary to
use a 75-ohm unbalanced-type outdoor FM antenna using
an optional (not supplied) matching transformer connected
to an external antenna. Generally, a 3-element antenna will
be sufficient; if you live in an area where the FM signals are
particularly weak, it may be necessary to use one with 5 or
more elements.
C Subwoofer
Connect the "TO SUBWOOFER" and the "FROM MAIN" sockets
using the supplied cable.
< Connect the Connectors in the direction as figured.
D SPEAKERS
Connect the left speaker's plug to L, and the right speaker's
plug to R.
< If not using the included speakers, make sure the speakers you
use are at least 4 Ω impedance.
< Do not connect anything other than speakers to these
terminals.
Outdoor FM Antenna (75Ω)
E AC Power Cord
Be sure to connect the power cord to an AC outlet which
supplies the correct voltage.
Hold the power plug when plugging or unplugging the power
cord. Never pull or yank on the power cord.
F POWER switch of the Subwoofer
Use this switch to turn the system on or off.
< If the power switch of the subwoofer turned off, the settings
kept in memory (clock, preset stations, timer setting) will be
erased.
To avoid loosing your settings, it is advisable to keep this switch
ON when not in use.
G PHONES
For private listening, first reduce the volume level to minimum.
Then insert the plug from your headphones into the PHONES
jack, and adjust the volume using the VOLUME buttons. The
sound from the speakers is cut off while the headphone jack is
inserted.
CAUTION
Always lower the volume level prior to plugging in your
headphones. TO AVOID DAMAGING YOUR HEARING - Do not
place your headphones on your head until after you have
plugged them in.
H AUX IN
You can connect a portable audio player to this jack.
Connect the LINE OUT or PHONES jack (audio output jack) of
the player using the supplied stereo mini plug cable.
When using the PHONES jack of your mini player, you must
adjust the volume of the mini-player or you may hear no sound
from your TD-X300i.
I

VIDEO OUT terminal

This terminal outputs video signal from iPod.
Use an RCA (pin) video cable to connect the Dock to the
composite video connector of a television or monitor.
S-VIDEO OUT terminal
J
This terminal outputs video signal from iPod.
Use an S-Video cable to connect the Dock to the S-Video
input of a suitably equipped television or monitor. Use this
connection in preference to a composite video connection.
7