Sleep Timer; Tone Control - Teac TD-X300i Owner's Manual

Muting
To mute the sound temporarily, press the MUTING button. Press
the MUTING button again to restore the sound.
< While muting is engaged, "MUTING" blinks on the display.
< If you change the volume during the muting, the muting will be
canceled.
Headphones
For private listening, first reduce the volume level to minimum.
Then insert the plug from your headphones into the PHONES
jack, and adjust the volume using the VOLUME buttons. The
sound from the speakers is cut off while the headphone jack is
inserted.
CAUTION
Always lower the volume level prior to plugging in your
headphones. TO AVOID DAMAGING YOUR HEARING - Do not
place your headphones on your head until after you have
plugged them in.

Sleep Timer

Repeatedly pressing the SLEEP button permits setting an interval
(from 90 down to 15 minutes) after which you want the unit to
automatically turn off and shift into Standby mode.
Each press of the SLEEP button changes the time indication by
15 minutes.
90
< The display is dimmed when you set the sleep timer.

Tone Control

1. Press the BASS or TREBLE button.
To adjust the level of low frequency sound range, press the bass
button.
To adjust the level of high frequency sound range, press the
treble button.
2. Within 5 seconds, press the VOLUME buttons to change
the setting.
The level can be adjusted from –5 to +5.
Dimmer
You can dim the front panel's display by pressing the DIMMER
button.
< This function will be cancelled when the STANDBY/ON button (
) is pressed.
.........
75 15
(off)
13