Listening To The Radio - Teac TD-X300i Owner's Manual

1 Press the FUNCTION button to select "TUNER".
< You can also use the FM/AM button to select "TUNER".
2 Press the FM/AM button to select a band.
3 Select the station you want to listen to (auto selection).
Hold down the TUNING Up or Down button until the frequency
display begins to change. When a station is tuned in, the tuning
process will stop automatically.
< Press the Up or Down button to stop the auto selection.
Selecting stations which cannot be tuned automatically
(manual selection)
When the Up or Down button is pressed momentarily, the
frequency changes by a fixed step.
Press the Up or Down button repeatedly until the station you
want to listen to is found.

Listening to the Radio

FM MODE button
Pressing this button alternates between STEREO mode and
MONO mode.
2
1
3
STEREO
FM stereo broadcasts are received in stereo and the "STEREO"
indicator lights in the display.
< If the sound is distorted and the "STEREO" indicator flashes, the
signal is not strong enough for good stereo reception. In this
case, change to MONO mode.
MONO
To compensate for weak FM stereo reception, select this mode.
Reception will now be forced to monaural, reducing unwanted
noise.
If the reception is poor
AM broadcast
Rotate or relocate the AM antenna to find the best position for
AM stations.
FM broadcast
Extend and rotate the FM antenna until you receive the stations
clearly. You may need to relocate the unit.
23