Listening To Ipod - Teac TD-X300i Owner's Manual

Insert the iPod into the Dock of the TD-X300i.
Then press the play/pause button (y/J) on the iPod. The TD-
X300i will automatically turn on and start playback from the
iPod's music list.
< If the iPod that is in playback mode is inserted into the Dock,
the TD-X300i will automatically turn on and start playback of the
iPod.
< Make sure to use an appropriate Dock adapter (see "Getting
started" on page 9).
< The battery of the iPod is recharged to the full whenever the
iPod is docked and the TD-X300i is turned on.
< When headphones are plugged into the iPod, sound comes from
both the speakers of the TD-X300i and the headphones.
< The stop button (H) doesn't work in iPod mode.
< In standby mode, TD-X300i can not recharge iPod because of
minimised power consumption to meet the reguration of IEA. If
you need to recharge iPod, please turn on the unit.
To select iPod mode
Select "iPod" using the FUNCTION button. If an iPod is already
docked, playback will start.
When no iPod is docked, the iPod indicator on the display blinks.
In iPod mode, press the play/pause button (G/J) to start or
pause playback.
14

Listening to iPod

To suspend playback temporarily
(pause mode)
Press the play/pause button (G/J) during playback. Playback
stops at the current position. To resume playback, press the play/
pause button (G/J) again.
To skip to the next or a previous song
During playback, press the skip button (.or/) repeatedly
until the desired song is found. The selected song will be played
from the beginning.
< When the . button is pressed during playback, the song
being played will be played from the beginning. To return to the
beginning of the previous song, press the . button twice.
Search for a part of a song
During playback, hold down the skip button (.or/) for
more than 2 seconds and release it when the part you want to
listen to is found.
.//
G/J