Getting Started - Teac TD-X300i Owner's Manual

The TD-X300i comes mounted with an adapter for iPod with color
display (40GB, 60GB), "60GB (color) + Photo 40GB/60GB". To play
your iPod through the TD-X300i, you have first to check if the
factory mounted adapter fits your model of iPod. If it does not, you
have to replace it with a correct one, as explained below.
1. Remove the adapter from the Dock of the TD-X300i.
Hold the left and right sides of the adapter and gently pull it up.
2. Choose the Dock adapter that fits your iPod mobile digital
device.
See supplied information sheet to choose the adapter to fit your
iPod.
3. Insert the adapter into the Dock of the TD-X300i.
Fit the front edge of the adapter into the Dock, and then press
the back edge of the adapter onto the Dock until a slight "click"
is heard indicating the adapter is inserted correctly.
< When you need to remove the adapter, hold the left and right
sides of the adapter and gently pull it up.

Getting started

1
2
Compatible iPod Software
In case your iPod will not work with the TD-X300i or with the remote
control unit, software update may solve the problem.
Visit the Apple website and download the latest iPod Software.
http://www.apple.com/ipod/download/
iPod is a trademark of Apple Inc., registered in the U.S. and other
countries.
Docking an iPod to this system
iPod video output
< Make the following settings on your iPod's menu to output
video to a TV via this system's dock.
In the [Video] menu, select [Video Settings]. Set [TV OUT] to
[On] or [Ask].
If you have set [TV OUT] to [Ask], your iPod prompts you each
time you play a video to specify whether to output it to a TV.
NOTE:
If you output video to a TV from your iPod, the video is not
displayed on the iPod's screen.
iPod touch does not contain this menu. You will have to
specify whether to a output video to a TV each time you play
it.
Using the alarm on your iPod touch
< If you specify [Slide to power off] on your iPod touch, you
cannot use the alarm even if the iPod touch is docked to this
system.
To use the alarm on your iPod touch, do not select [Slide
to power off]. (The screen can be turned off without any
problem.)
< If Video is displayed on your iPod touch's screen, you cannot
use the alarm even if the iPod touch is docked to this system.
To use the alarm on your iPod touch, select any item other
than Video.
9