Teac TD-X300i Owner's Manual page 21

To check the programmed order
In the stop mode, press the MEMORY button repeatedly. The
track/file number and program number will be shown on the
display.
To add a track/file to the end of the program
In the stop mode, press the MEMORY button repeatedly until
"00" appears on the display. Select a track/file number using the
skip button (.or/) and then press the MEMORY button.
The track/file is added to the end of the program.
To overwrite the program
In the stop mode, press the MEMORY button repeatedly until the
program number to be changed appears on the display.
Select a new track/file number using the skip button (.or/)
and then press the MEMORY button.
To clear program
To clear the programmed contents, press the MEMORY and the
stop button (H) in the stop mode.
< If one of the following buttons is pressed, the programmed
contents will also be cleared:
L, FUNCTION, FM/AM,
< If the unit is disconnected from the power supply, the
programmed contents will be cleared.
21