Listening To The Radio - Teac EX-M5 Owner's Manual

TUNER
FM/AM
1 Press the TUNER (FM/AM) button.
2
To select the band (AM or FM), press the TUNER (FM/AM)
button again.
3 Select the station you want to listen to (auto selection).
Hold down the TUNING Up or Down button until the
frequency display begins to change. When a station is tuned
in, the tuning process will stop automatically.
< Press the Up or Down button to stop the auto selection.
Selecting stations which cannot be tuned automatically
(manual selection)
When the Up or Down button is pressed momentarily, the
frequency changes by a fixed step.
Press the Up or Down button repeatedly until the station you
want to listen to is found.

Listening to the Radio

If the reception is poor
AM broadcast
Rotate or relocate the unit to find the best position for AM
stations.
FM broadcast
Extend and rotate the FM antenna until you receive the
stations clearly. You may need to relocate the unit.
SKIP
FM MODE Button
Pressing this button alternates between Stereo mode and
Mono mode.
Stereo:
FM stereo broadcasts are received in stereo and the
"STEREO" indicator lights on the display.
Mono:
To compensate for weak FM stereo reception, select this
mode. Reception will now be forced to monaural, reducing
unwanted noise.
17