Live View; Adding And Configuring Ip Cameras - HIKVISION DS-9600 Series Quick Operation Manual
Hide thumbs
Also See for DS-9600 Series:
- User manual (236 pages) ,
- Quick start manual (13 pages) ,
- User manual (134 pages)
Table of Contents
Advertisement
Quick Operation Guide of DS-9600/8600/7700/7600NI-ST and DS-7700/7600NI-SP Series NVR
13. Click OK to complete the startup Setup Wizard.
Live View
Some icons are provided on screen in Live View mode to indicate different camera status. These icons include:
Live View Icons
In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the
record and alarm in the channel, so that you can find problems as soon as possible.
Alarm (video loss, tampering, motion detection or sensor alarm).
Record (manual record, schedule record, motion detection or alarm triggered record)
Alarm & Record
Adding and Configuring IP Cameras
You should add and configure the online IP cameras to enable the live view and recording function.
Adding IP Cameras
You can search and add the online IP cameras by following the startup wizard, or according to the following steps.
Steps:
1.
Enter the Camera Management interface.
Menu> Camera> Camera
Copy Record Settings
25
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DS-9600 Series and is the answer not in the manual?
Questions and answers