Using The Start Wizard; Login Window - HIKVISION DS-9600 Series Quick Operation Manual

Hide thumbs Also See for DS-9600 Series:

Table of Contents

Quick Operation Guide of DS-9600/8600/7700/7600NI-ST and DS-7700/7600NI-SP Series NVR

2. Select the Shutdown button.

3. Click the Yes button.

Using the Start Wizard

By default, the Setup Wizard starts once the NVR has loaded, as shown in Figure below.

Operating the Setup Wizard:

1. The Setup Wizard can walk you through some important settings of the NVR. If you don't want to use the

Setup Wizard at that moment, click the Cancel button. You can also choose to use the Setup Wizard next

time by leaving the "Start wizard when NVR starts?" checkbox checked.

2. Click Next button on the Wizard window to enter the Login window.

3. Enter the admin password. By default, the password is 12345.

4. To change the admin password, check the New Admin Password checkbox. Enter the new password and

confirm the password in the given fields.

5. Click the Next button to enter the date and time settings window.

Start Wizard Interface

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the DS-9600 Series and is the answer not in the manual?