Adding The Initio Driver To An Existing Sco Unix System - Initio INI-9100U User Manual

4. Please refer to the SCO UNIX documentation for additional
information. You have completed the installation of the SCO UNIX
driver.

Adding the Initio driver to an existing SCO UNIX system

1. Insert the INITIO INI-9100U/9100UW DRIVER DISK 2 diskette
into your floppy drive.
2. Type: "installpkg" under the command prompt, <ENTER>
3. The following system screen will be displayed (figure 10-5):
Type: i91u < ENTER >
figure 10-5 SCO UNIX install package
10-5